How does loop recording works and how do I set it up?

Loop Recording is used if you want the device to record continuously without manually deleting files on the memory card when it gets full. In loop recording, video files are saved and divided into section automatically. 

When the microSD card is full, the device will automatically delete the oldest files to free up some space for the device to continue recording. At the same time, the device will automatically judge the available space and effective space in the microSD card. If the available space or the effective space is too small the video recording stops.

To setup loop recording follow the steps below:

1. Press and hold "VOL-/|<<" and "VOL+/>>|" button at the same time for 5 seconds.

1. Go through the menu and select Loop Recording and activate it.