PeTrack requires a standard (15 x 25mm) unlocked prepaid GSM SIM card in order to operate. Before installing the SIM card, make sure you have the correct size. You can refer to the picture below for the sizes of the SIM card.
To install the SIM card, please follow the steps below:
- Loosen 4 screws with the screw driver that came with the PeTrack.
- Remove the back cover and insert the SIM card into the holder with the gold-colored contacts facing down (as shown below).
- Put the cover back with the USB side and tighten the 4 screws back.
- Insert the 4 waterproof plugs over the screws then press and hold the Power button for 2 seconds to turn on the device.
NOTE: Confirm that the SIM card does not have a PIN code before installing by inserting it to a mobile phone. If a PIN code is active, make sure to cancel it or ask the local carrier for more information.