- Download TBPT App from Google Play Store (or, click the link below) and install it to your Android phone.
- Tap "Add" to add device(1). Input the SIM card number that is inserted to the PeTrack and call that number(2). Once you hear the line ringing, hang up the phone. Few seconds later you will get the current location pointed on the map(3) and this means that the app is installed successfully.
- To track using the app, just open the app then click the large GPS PeTrack icon(1). A window would pop up, tap the "Reflash" icon(2) and it will automatically dial the phone number of the SIM card(3) installed in the PeTrack then automatically hangs up. (In some phones, the app does not automatically hang up so you would need to manually end the call.) After it hangs up, the location on the map will then be updated to the current location(4).
NOTE: Your PeTrack will fall asleep automatically after sitting still for more than 3 minutes, if you're trying to setup your APN, or call it, or text it, or just getting it to respond, you need to either physically shake the unit every minute while you're outside or it needs to be attached to an active pet which is outside. Otherwise, you'll have no response as it's completely dependent on motion detection to conserve its battery power.
For additional reference, you may click the link below for the "How-To Setup TBPT (SMS/GSM) App" video.