How to setup the iBulb camera?

Make sure that a formatted microSD card (2GB - 32GB) is available, the power socket must be turned off and the voltage is within operating range (110V - 220V). Then, follow the steps below.

1. Insert the microSD card to the camera. Follow correct orientation.

       

2. Put the iBulb camera to the socket like a regular bulb then turn on power.

     

3. You will see a blue and red indicator lights. After a few seconds, the blue indicator light will be flashing while the red is turned off which indicates that the camera is recording.

NOTE: If you only see a red indicator light that means that microSD card inserted to the camera has a problem. Remove the microSD card from the camera, reformat the card then re-insert it to the camera. Or, try a different microSD card.